Instructions M 20

Mixing ratio 10:3 (100ml M20 : 30ml activator).

Fill up bottle (60ml) with 18ml activatorn shake the bottle strongly and immediately pour M20 into the prepared foot. Rigid after approx. 60 sec. After additional 60 sec, the horse may stand on its foot again. Mask molded bar from M20 with adhesive tape or besprinkle it with sawdust or chalk dust to prevent M20 from adhering to the ground. Best processing temperature is 20-30°C. Ideallt the M20 Soft Bar encloses the mesh pad 1cm towards the center on the foot. This extends the durability of the soft bar.